Ceramic Tile Adhesive:

Ceramic tiles are used for a variety of purposes and conditions. Due to the array of substrates and subfloors you could find yourself working with, choosing the right adhesive is vital. Our tile primer works with a wide range of wall and floor back grounds:

Floor including:
- Concrete base
- Anhydrite calcium sulphate screed
- Ceramic and natural stone base
- Dump proof membranes
Wall including:
-Plaster& plaster board
- Rendered surfaces
- Concrete blocks
- Dense concrete
- Plywood
- Painted walls
- Fiber mesh
- Cement faced boards
- Tile backer boards
- Tile to Tile
- Light weight blocks

Using Ceramic tile adhesive of this company, for your wall or flooring offers many advantages, both during the bonding process and following installation.
When installing ceramic tile, an emulsion or ready mix adhesive is often perfect fir the job and will improve ease of application. If you are after adhesives with rapid grabbing or setting times or require more specific shower tile adhesives that have excellent water and mold resistance.
The ceramic tile adhesive is packed in sacks with 25 kg weight.

Ready Mix Mortar:
From a small domestic extension to a major multi- story development, this product ready to use mortar is ideally suited to every application. with a proven track record of delivering consistently high quality factory produced mortar and excellent support, is the flexible option.
Typically mortar is a combination of cement& sand( in some instances lime) and is primarily used for plastering, bedding blocks and bricks to form walls and other structures. As ready to use mortar requires no further mixing and has excellent workability.
- Durability & Resistance
- Versatile usage
- Colorful solutions
- Flexible delivery
The Ready mix mortar is packed in sacks with 25 kilograms weight.

AAC Block Jointing Adhesive:
This product  is a high strength adhesives for quick and firm laying of AAC blocks with thin joints. It is a factory mixed mortar made up of cement,graded sand and blended with polymers to impart high strength and water retention properties even when in thickness of 2-3 mm layer.
- High Bond Strength
- No shirinkage cracks
- High Thermal Insulation
- Flexible, shock & impact resistant
- Improved adhesion between two blocks
- Easy to use
- Promixed

Porcelain Tile adhesives:
Porcelain tiles generally denser and more durable than ceramic tiles .These materials are also classified as impervious,meaning they have a water absorption rating of 0.5% or less,they are  well suited for wet environment applications such as in kitchins and bathrooms.
Our range of ready mixed and powdered porcelain tile adhesives,covers a broad selection of porcelain tile installation applications.our porcelain tile adhesives work with many different substrates across both wall and floor tile

- Drywall
- Concrete
- Plywood
- Cement backer board
- Tile over tile
- Waterproofing membranes
- Uncoupling membranes

Bonding Powder
This is a combination of cement, filters and special synthetic organic polymers that is used ready-made. Due to the presence of organic polymers in the structure of the bonding powder, this material has a high adhesion to the surfaces used such as ceramic tiles and creates a completely uniform, durable and impermeable surface.
- Resistant to mold
- Resistant to water and moisture
- High erosion strength
- Solvent free and environmentally friendly

Dough Ceramic and Tile Adhesive:
Dough Ceramic and Tile Adhesive of this company is based on vinyl acetate resins, mineral powders and constituent materials for internal and external wall surfaces. In addition to quick installation and significant loss in the building materials weight, using this adhesive profits also the advantage of increasing the interior space of the building. The fact that in old methods of installing a tile on a tiled wall is located 4 to 5 cm from the wall and behind it is filled  with cement slurry that not only consumes a lot of materials, but also a large amount of interior space. While, using this adhesive, the tile adhesive is wound on the wall in the thickness of 4 to 5 millimeter and then the tile in a tiny amount of time is mounted on it.

Concrete Bonding Adhesive:
The Cement present in a concrete mix does not have any bonding agent within it. When a layer of fresh concrere is added over an existing or old concrete layer,they exist as two seperate layers without any bond.So a bonding agent must be introduced between the layers.
- Very easy to use and apply
- They reduce cracks formed in shrinkage
- The permeability of  concrete is reduced
- The tensile,flexural and bond strength of the concrete or mortar are increased

Different Types of concrete bonding used in construction are:
- Epoxy
- Acrylic latex
- Polyvinyl Acetate